1、Antistatic polyester cartridgeIntroduction
Anti-static is the after- treatment method for the polyester cartridge.
Anti-static is anti-static aluminum processing. Is in the filter surface covered with a layer of thin aluminum breathable conductive coating. To avoid flash over static for dust explosion-proof condition.
2、Specification
|
Cartridge Model |
Top Cap OD mm |
Top Cap ID mm |
Bottom Cap OD mm |
Bolt Hole mm |
Height mm |
Filtration Surface m² |
|
TR/D 3266 |
Φ324 |
φ213 |
Φ324 |
φ14 |
660 |
9.4 |
|
TR/D 3566 |
Φ352 |
φ241 |
Φ352 |
φ16 |
660 |
10 |
|
TR/U 3266 |
Φ324 |
φ213 |
Φ324 |
φ14 |
660 |
9.4 |
|
TR/U 3566 |
Φ352 |
φ241 |
Φ352 |
φ16 |
660 |
10 |
3、Product features
Imported cellulose fiber or synthetic fiber for base media, excellent fiber efficiency
Wide pleated design, large filtration surface
Galvanized cap and a diamond network, good rust prevention performance, high operating rate
Special seal elastic neoprene
Operating temperature: ≤ 70 ºC, relative humidity: ≤ 80%Application:
Gas turbine, compressor, sand blast, tobacco, ash, dust and others.
