An effective method to prevent the filter element from being sucked flat in operation

- Jul 13, 2020-

An effective method to prevent the filter element from being sucked flat in operation


How to effectively prevent the dust removal filter element from being sucked flat in the work, improper use of filter element or the selection of inappropriate filter element, in the work of the filter element will be sucked flat, how to effectively avoid it? We summarize some of the possible reasons for the above:


1. The filter element is blocked and not replaced in time. The filter element is severely blocked by pollutants during operation and is not cleaned in time, which results in the increase of pressure difference of the filter element and the insufficient strength of the filter element, which results in the flattening of the filter element.


2. Improper selection of filter element, which is not suitable for the current working environment in the selection of filter element, is too accurate in the selection of filter element, or the pressure exceeds the allowable working pressure, which will also lead to the phenomenon of flatting filter element. There are a lot of customers think choose stainless steel sintering network filter, sintering felt filter can avoid this situation, but the fact is not like that, these two kinds of stainless steel filter although itself has certain compressive capacity, but exceeded its own compressive capacity, also can appear flat absorption phenomenon, we want to make appropriate adjustments according to the working pressure, such as skeleton, such effect will be better


3. Improper installation. The installation of the filter element should be accurate and stable.


www.tr-filter.com