High temperature resistant dust removal filter bag installation steps

- Aug 23, 2020-

High temperature resistant dust removal filter bag installation steps


Detailed operation steps of installing high-temperature dedusting filter bag:


Step 1: Single-section dust removal skeleton. Generally, there is room for bag changing operation. First, take out the dust removal skeleton bag together, and remove the filter bag attached to the dust removal skeleton with a knife or other tools. (Do not damage the dust removal skeleton during work)


Step 2: Multi-segment dust removal skeleton structure. The filter bag can be cut at the joint to split the dust removal skeleton, and then removed to an open field.


Step 3: Make sure that the size of the bag filter is consistent with the size of the installation. The imperfect processing of the bag filter is also the problem of high-temperature dedusting filter bag. After the high-temperature dust-resistant filter bag is installed, the mouth of the high-temperature dust-resistant filter bag is sealed tightly and it is difficult to turn the hand.


Step 4: The high-temperature dedusting filter bag opening completely, there is no margin after installation.


Step 5: Tighten the clamp cap structure to prevent falling or leakage of air.


www.tr-filter.com