Installation steps of air filter element

- Jun 04, 2020-

Installation steps of air filter element


In the first step, when we install the air filter element, we must ensure a very tight connection between the filter and the intake pipe. No matter whether we use flange or rubber pipe for connection, the material is not important, as long as there is no air leakage, it will not cause our gas leakage. We must also install washers on both ends of the filter element and take care that the airfoil nut is not twisted too hard as this may damage our paper air filter element. The second step, in the maintenance of the paper filter element can not be put into our oil to clean, otherwise it is likely to cause such a serious accident flying car, it is best to use a soft brush to gently brush off the surface of the dust, or compressed air back blow to complete the process.


At the same time, it should be noted that when our air filter element is used for the fourth time, it needs to be replaced in a timely manner. If there is damage such as rupture or perforation before this, it should be damaged and replaced in advance.


www.tr-filter.com