The ash removal system of filter bag

- May 09, 2020-

The ash removal system of filter bag




During the use of the filter bag, the dust removal cycle and time are adjusted, which is an important factor in the performance of dust collection and operation. If the dust removal time of the filter bag is too long, the attached powder layer will be removed directly, which will become the cause of leakage and damage of the filter bag.


If the dust removal time of the filter bag is too short, the dust on the filter bag has not been removed, so it is necessary to resume the filtering operation. During the operation, the resistance will be restored and gradually increased, affecting the use effect.


During the operation of the filter bag, it is necessary to pay attention to whether there is condensation in the bag chamber and whether the ash discharge system is unblocked to prevent the occurrence of blockage and corrosion. The production of the main engine will be affected if the ash accumulation is serious. The installation of the filter bag, after use, whether there is bag drop, loose, wear and other situations occurred, after the operation of the chimney can be visually measured to determine the discharge.


The period of dust removal and the adjustment of dust removal time of the filter bag during operation are important factors affecting the performance of dust collection and operation condition. If the dust removal time is too long, the dust layer will be removed and become the cause of leakage and damage of the filter bag. If the ash removal time is too short, the dust on the filter bag has not been cleared off, the filtration operation will be resumed, the resistance will be quickly restored and gradually increased, affecting the effect of its use.


www.tr-filter.com