Types of liquid filter housing

- Apr 23, 2020-

Types of liquid filter housing

Liquid filter is an indispensable device on the conveying medium pipeline.

 It is usually installed in the inlet end of pressure reducing valve, pressure relief valve, constant water level valve or other equipment to eliminate impurities in the medium to protect the normal use of the valve and equipment. 

When the fluid enters the filter cylinder with a certain specification of the filter screen, its impurities are blocked, and the clean filtrate is discharged by the filter outlet, when the need to clean, as long as the removable filter cylinder is taken out, after processing reload, therefore, the use and maintenance is very convenient. 

The classification of liquid filters according to the filter media is divided into: 

  1. Air filters to make the polluted air is clean to the production, living needs of the state, that is, to make the air to a certain degree of cleanliness.

  2.  The liquid filter makes the contaminated liquid clean to the state needed for production and life, that is, to make the liquid reach a certain degree of cleanliness.

  3.  The network filter is set up to block spam, and the information on the computer screen should conform to the requirements as much as possible.

  4.  The light filter absorbs unwanted light rays.

    According to the installation method: oil suction filter oil return filter line filters

    according to performance can be divided into: filter binocular filter high pressure pipeline filter mentioned above should be net filter,

    filter actually there are a lot of kinds, such as laminated filter, sand filter, carbon filter and so on, main principle is to use the pore diameter of filter medium intercept than medium pore size smaller substances, and of course some filter medium also has the special effect such as adsorption.