Maintenance Of Filter Cartridges

- Nov 14, 2018-

1, filter is the core parts of the filter, made of special materials, belong to the wearing parts, the need for special maintenance, maintenance;

2, when the filter after a long period of work, one of the filter cartridges have intercepted a certain amount of impurities, will lead to an increase in pressure, the reduction of flow, this time need to clean in a timely manner;

3, in the cleaning, must be careful not to deform or damage the filter cartridge. Generally according to the use of different raw materials, the service life of the filter cartridge is also different, but with the extension of the use of time, the impurities in the water will clog the filter, so generally speaking PP filter three months need to be replaced, activated carbon filter six months need to be replaced, and fiber filter because can not be cleaned,

Generally placed in PP cotton and activated carbon back-end use, not easy to cause blockage; Ceramic filter can usually be used for 9-12 months. Filter paper in the equipment is also one of the key, high-quality filtration equipment in the filter sheet is usually filled with synthetic resin of ultra-fine fiber, it can effectively filter impurities and strong storage capacity. According to the relevant statistics, a passenger car with an output of 180-kilowatt kilowatts of 30,000 km of travel, the filtration equipment filtered out of the impurities of about 1.5 kg.

In addition, the equipment for the strength of the filter paper also has a great demand, due to the large flow of air, the strength of the filter paper can resist the strong airflow, to ensure the efficiency of filtration, extend the service life of the equipment.